Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAlrudainy, Haider M.-
dc.descriptionPhD Thesisen_US
dc.description.abstractElectrostatically-actuated Micro-Electro-Mechanical/Nano-Electro- Mechanical (MEM/NEM) relays are promising devices overcoming the energy-efficiency limitations of CMOS transistors. Many exploratory research projects are currently under way investigating the mechanical, electrical and logical characteristics of MEM/NEM relays. One particular issue that this work addresses is the need for a scalable and accurate physical model of the MEM/NEM switches that can be plugged into the standard EDA software. The existing models are accurate and detailed but they suffer from the convergence problem. This problem requires finding ad-hoc workarounds and significantly impacts the designer’s productivity. In this thesis we propose a new simplified Verilog-AMS model. To test scalability of the proposed model we cross-checked it against our analysis of a range of benchmark circuits. Results show that, compared to standard models, the proposed model is sufficiently accurate with an average of 6% error and can handle larger designs without divergence. This thesis also investigates the modelling, designing and optimization of various MEM/NEM switches using 3D Finite Element Analysis (FEA) performed by the COMSOL multiphysics simulation tool. An extensive parametric sweep simulation is performed to study the energy-latency trade-offs of MEM/NEM relays. To accurately simulate MEMS/NEMS-based digital circuits, a Verilog-AMS model is proposed based on the evaluated parameters obtained from the multiphysics simulation tool. This allows an accurate calibration of the MEM/NEM relays with a significant reduction in simulation speed compared to that of 3D FEA exercised on COMSOL tool. The effectiveness of two power gating approaches in asynchronous micropipelines is also investigated using MEM/NEM switches and sleep transistors in reducing idle power dissipation with a particular target throughput. Sleep transistors are traditionally used to power gate idle circuits, however, these transistors have fundamental limitations in their effectiveness. Alternatively, MEM/NEM relays with zero leakage current can achieve greater energy savings under a certain data rate and design architecture. An asynchronous FIR filter 4 phase bundled data handshake protocol is presented. Implementation is accomplished in 90nm technology node and simulation exercised at various data rates and design complexities. It was demonstrated that our proposed approach offers 69% energy improvements at a data rate 1KHz compared to 39% of the previous work. The current trends for greater heterogeneity in future Systems-on- Chip (SoC) do not only concern their functionality but also their timing and power aspects. The increasing diversity of timing and power supply conditions, and associated concurrently operating modes, within an SoC calls for more efficient power delivery networks (PDN) for battery operated devices. This is especially important for systems with mixed duty cycling, where some parts are required to work regularly with low-throughput while other parts are activated spontaneously, i.e. in bursts. To improve their reaction time vs energy efficiency, this work proposes to incorporate a power-switching network based on MEM relays to switch the SoC power-performance state (PPS) into an active mode while eliminating the leakage current when it is idle. Results show that even with today0s large and high pull-in voltages, a MEM-relay-based power switching network (PSN) can achieve a 1000x savings in energy compared to its CMOS counterpart for low duty cycle. A simple case of optimising an on-chip charge pump required to switch-on the relay has been investigated and its energy-latency overhead has been evaluated. Heterogeneous many-core systems are increasingly being employed in modern embedded platforms for high throughput at low energy cost considerations. These applications typically exhibit bursty workloads that provide opportunities to minimize system energy. CMOS-based power gating circuitry, typically consisting of sleep transistors, is used as an effective technique for idle energy reduction in such applications. However, these transistors contribute high leakage current when driving large capacitive loads, making effective energy minimization challenging. This thesis proposes a novel MEMS-based idle energy control approach. Core to this approach is an integrated sleep mode management based on the performance-energy states and bursty workloads indicated by the performance counters. A number of PARSEC benchmark applications are used as case studies of bursty workloads, including CPU- and memory- intensive ones. These applications are exercised on an Exynos 5422 heterogeneous many-core platform, engineered with a performance counter facilities, showing 55.5% energy savings compared with an on-demand governor. Furthermore, an extensive trade-off analysis demonstrates the comparative advantages of the MEMS-based controller, including zero-leakage current and non-invasive implementations suitable for commercial off-the-shelf systems.en_US
dc.description.sponsorshipHigher committee of education development in Iraq (HCED)en_US
dc.publisherNewcastle Universityen_US
dc.titleNon-invasive power gating techniques for bursty computation workloads using micro-electro-mechanical relaysen_US
Appears in Collections:School of Electrical and Electronic Engineering

Files in This Item:
File Description SizeFormat 
Alrudainy, H.M.A. 2017.pdfThesis10.7 MBAdobe PDFView/Open
dspacelicence.pdfLicence43.82 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.